Welcome to Comcast Help & Support Forums
You can contribute an answer or post a question.
Reply
Posted by
Contributor
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
Member Since: ‎12-11-2008
Posts: 23
Accepted Solution

Installation of cable box dvd-vcr tv?

i am trying to set up this combo using the two rca cords in the wiring diagram option 1

of comcast"s manual page 21 on connections.  My dvd-vcr does not have an rf or cable in,cable

out connections. Where is the cable from the wall hooked up too?I cannot use option 2 here because of lack of cable connections on dvd-vcr,  thanks!! and is there another cable involved?for example does the cable from wall go to tv and then another cable from tv to cable box? 

Posted by
Cable Expert
Member Since: ‎12-31-2004
Posts: 10,676

Re: Installation of cable box dvd-vcr tv?

If you could provide a link to the diagram and manual you're referring to it would help.
Posted by
Contributor
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
Member Since: ‎12-11-2008
Posts: 23

Re: Installation of cable box dvd-vcr tv?

the manual i am referring too is  the wired diagram on the manual provided to all

newbies  welcome to comcast digital cable. page 21. you can download it from the comcast site under digital tv intallation of cable etc. 

 

Posted by
Cable Expert
Member Since: ‎12-31-2004
Posts: 10,676

Re: Installation of cable box dvd-vcr tv?

I don't see it.  How about using one of the diagrams on this page?  (Or provide a link to the manual you refer to.)  Do you want to record the output from the cable box on the VCR?  Is the DVD player the same piece of equipment as the VCR?
Posted by
Contributor
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
Member Since: ‎12-11-2008
Posts: 23

Re: Installation of cable box dvd-vcr tv?

yes the dvd-vcr is one unit and i just use it to play dvd"s and vhs tapes. no recording. the manual on the on front  is entitled Happiness is only a power button away.The diagrams are on page 21d-22. on lower left back cover  is manual SA VODlink0108.no the digram i<m referring too is only in this manual..thanks!!

 

Posted by
Cable Expert
Member Since: ‎12-31-2004
Posts: 10,676

Re: Installation of cable box dvd-vcr tv?

No recording makes it much simpler.  What outputs does your DVD/VCR have, what inputs does your TV have, and what outputs does your cable box have?  It would also help to know the make and model of all that equipment.  Let's forget about the Comcast manual.
Posted by
Contributor
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
Member Since: ‎12-11-2008
Posts: 23

Re: Installation of cable box dvd-vcr tv?

the toshiba vcr-dvd deck is model # SD V295ku and on the back it has two sets of rc-inputs under dvd-vcr one out for video out,audio l and audio r .and  for video In  left and right audio rca hookups.  the tv is a panasonic CT-31G30t vintage 1996which has video and left and right rca input hookups. the vcr-dvd does not have coaxial cable input or output. hope this helps.  thanks
Posted by
Regular Problem Solver
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
  • Great Job! Your reply has been accepted. Thank you for helping and Congrats on your 1st Solution.
  • Communication is Key. Way to go, keep it up. Congrats on 100 Replies!
Member Since: ‎09-17-2008
Posts: 586

Re: Installation of cable box dvd-vcr tv?

You should be able to:

 

1) run the cable from the outlet to the cable box (cable in)

2) run a cable from the cable box (cable out) to your tv (cable in)

3) connect rca audio/video cables from your dvd-vcr (out) to your tv's rca audio/video inputs

 

You won't be able to record on the dvd-vcr combo since nothing is being sent to its inputs.  If your cable box has audio/video outputs, you can use those to connect to your tv if your tv can accept multiple inputs.

 

 

 

Posted by
Bronze Star Contributor
  • On your way! Congrats on Posting 10 topics!
Member Since: ‎10-22-2008
Posts: 142

Re: Installation of cable box dvd-vcr tv?

sounds like this set up should work,but just staticky video and no picture. I had it set up a month ago no problem.  A comcast tech is coming out tommorrow as i<m too frustrated with it. thanks for your help and will let you know what the problem was.  thanks!!
Posted by
Contributor
  • Congratulations on receiving your first Kudos! Thank you for your meaningful contribution to the forum. May this be the first of many kudos.
Member Since: ‎12-11-2008
Posts: 23

Re: Installation of cable box dvd-vcr tv?

problem solved. All i had to do is hit the video tv button on my remote and switch to

video 1 and voila  a picture. thanks for your help. i did not need comcast.

Posted by
New Visitor
Member Since: ‎09-02-2011
Posts: 1

Re: Installation of cable box dvd-vcr tv?

I WOULD LIKE A WIRING INSTALLATION DIAGRAM TO INCLUDE TV, DVD, NEW MODEM BOX

Posted by
Bronze Star Contributor
  • On your way! Congrats on Posting 10 topics!
Member Since: ‎10-22-2008
Posts: 142

Re: Installation of cable box dvd-vcr tv?

problem solved many moons ago. Thanks for your delayed response!!

Advanced
You must be signed in to add attachments