Well same old same old! I am SO ready to make the switch to DSL.
Here's some info to get you up to speed.
I have had Cable internet at my residence for going on 8 almost 9 years now. Started as Adelphia and I am now a Comcast customer. For the first 5-6 years I had Comcast I had some generic config file because what the website was showing and what I was PAYING for were not even available in my area. After discovering this and fighting my way to the top I was offered a decent discount that I accepted. So for a year or so I was paying half of what I used to and was OK with it because I now felt I was PAYING for what I was getting.
I was told by the person who helped me (Tom?) that when that offer ran out to call back and he would get in reinstated. Well, it ran out. When I couldn't find his number again I just called the 800 number and was told the couldn't help me as there was no offers going on at that time. I explained what tom? Said and they said they never do that.
I've let it go for months now but with times the way they are I can no longer justify paying for internet that is well bellow what I should be getting. EVERY night it drops to dial speeds and randomly throughout the day it does the same. I checked my modem and I have the correct config file finally. I have had the right config for about 7 months now, but still have issues.
Here is a Shaper probe readout. I should be getting 12/2 but it jumps all over the place and I can never seem to get a reliable readout.
At 6dBmv, your downstream power level may be considered a bit marginal. It could be causing some of the inconsistencies you are seing if it fluctuates toward the 7 or 8 range or higher..
Check to make sure you have no unnecessary splitters between the point where your cable is initially split to feed TVs and the modem. The modem should be on it's own branch, with no other splitters. Also verify all connections are tight and there is no corrosion on the connectors. Make sure all the coax cable is of good quality and not damaged.
Thanks for looking folks! Just checked my Downstream power level and it is now showing at 7.
No splitters in the line anywhere although, I live in a small 2 apartment building and there could be Something somewhere I can't see.
I don't really think its a line issue because when everything works it works great! Things have mostly gone done hill the most in the last month and a half or so. I suspect it has something to do with the cold weather moving in. A Comcast tech told me before that they have to adjust the amplifier up on the pole according to outside temps.
Shaping=Powerboost. PowerBoost is a burst of speed that helps address the "bursty" nature of the internet. We want to know what your sustained speeds are verses the PowerBoost speeds that those online speed tests report.
It looks like your speeds are about 6/1 which is an "economy" tier. Do you know what speeds you should be getting?
I'm pretty sure I am on the performance tier, which I think is supposed to be 12/2?
My modem shows I have config file "d11_m_sb5100_silverpboost_c01.cm" which if I remember correctly was performance tier.
Everytime I have issues and try to get to the bottom of it I have trouble because the little Hill Billy town I live in is still in the stoneage and is always at the end of the upgrade list. For example Comcast tries to sell me extreme 105 everytime i have problems.... 105 is not available in my area. Actually I don't even know if I could get 50 here.
The worst part is paying $70 a month for 12/2 or whatever it is and never getting it. I can get faster DSL service for a little less than what I'm paying now. I have told Comcast representatives this before and they LAUGHED AT ME. They say there is no way I can get faster DSL at a cheaper price..... guess they don't know how this backward town works!
I asked ComcastLarry to take a look at your account to make sure everything is OK. He will be able to tell what tier you are subscribed to and what is available in your area. He can also make sure everything is provisioned correctly. He's a busy guy, give him a little time.
Had a tech come out yesterday, said everything was fine. The only thing he said he could do is update my old modem to the new docsis 3 standard that they are using now.
I asked about congestion issues since it seem to be the worst in the evenings and he said that there is a "Saturation" problem that they are working on. He said something about them needing to upgrade/update something on there end to support all the new docsis 3 modems. He said they almost had it finished but the FCC stop them for the day and that it "should" be completed by next Wednesday. Time will tell I guess.
Then... Today I got an E-mail from Comcast about the speed increase. So... Have they been messing with this for the past two months or so and causing this problem or what?
My speeds down/up have improved WHEN my connection is working.
My new modem stats. Are those Downstream power levels to high? Also, why do I have 4 down channels and only 1 up?
So i now have 2 upload channels instead of 1 and my upload has dropped back to where it was before the speed upgrade. Before the updated speeds i had around 3.6 up then the upgrade came and when i had 1 upload channel i was getting close to 5 up. Now that i have another upload channel for a total of 2 my speed has dropped back to around 3.6? Not a big deal but... i thought adding a channel would help and not hurt my service!